0481 272 355 
ontrackelectrical@gmail.com
Pool Pump Electrical in Berwick
Power and isolation for pumps, filters and chlorinators, built for equipment that runs for hours in the weather.
Rated 5.0 from 10+ Google reviews
Is the Pump Tripping the Circuit?
Pool equipment tends to be an afterthought electrically. The pool goes in, the equipment needs power, and it ends up connected to whatever was nearest at the time.
That works until it does not. The most common call is a pump that trips the safety switch, usually once the weather turns wet, because moisture has found its way into a motor or a fitting that was never rated for a permanently outdoor position.
The other version is a circuit that was never sized for the load. Pumps and chlorinators draw steadily for hours at a time, which is a very different demand from the occasional garden appliance the circuit was originally intended for.
- A pump that trips the safety switch, particularly after rain
- Equipment running from an extension lead or a garden outlet
- No isolation switch anywhere near the equipment
- Corroded or cracked enclosures around the pool area
- Cable running along the ground or through garden beds unprotected
Equipment That Runs Season After Season
Done properly, pool equipment power is something you never think about again. A circuit sized for continuous running, an isolator positioned where the equipment can actually be switched off, and enclosures that will still be sealed in five summers.
The isolation point matters more than people expect. Being able to safely kill power at the equipment instead of walking back to the switchboard is what makes servicing and troubleshooting practical.
Cable gets routed, supported and protected along its whole run, not laid where it will eventually be dug up or chafed through. Everything above ground is rated for permanent exposure to sun and rain.
Where you are installing new equipment, tell us what is coming and we will size the supply for it. Where something has failed, we will find out why before reconnecting it.
Get A Free QuoteWhat Our Customers Say
- Wendy B Customer
Liam made the whole experience smooth and hassle free. He provided great advice and communicated in a friendly and professional manner. He was accommodating and flexible with my schedule and he left the area clean and tidy. I would definitely recommend him for future jobs.
Google - Aaron L Customer
We were so lucky that some friends recommended Liam. He's friendly, thoughtful, interested in solving problems, in a way that makes him a delight to deal with. We couldn't be happier with the results of his work and unlike other sparkies we've worked with, he turns up on time and even came back on his day off to make sure everything was working as it should. His prices are fair, and his work is of a very high standard. Couldn't be happier. We will definitely be hiring Liam for all future work in our house.
Google - Tania J Customer
Liam is polite, professional and competent. He arrived on time, sourced the problem quickly and gave great advice on the best solution. Very reasonable price, highly recommend
Google
Get A Free Pool Equipment Quote
Send a photo of the equipment area and tell us what you are installing or what has stopped working. That is usually enough to get started. Contact Ontrack Electrical for a free quote.
- Phone 0481 272 355
- Service Area Berwick & Melbourne's South East
Pool Equipment Questions
Most often moisture in the motor or in a fitting on that circuit, or a pump motor that is failing and drawing more than it should. Because the equipment sits outdoors permanently, water ingress is the first thing worth checking. Leave the circuit off and have it tested instead of resetting it.
Generally yes. Pumps, chlorinators and heaters draw steadily for hours, which is very different from the intermittent load a garden circuit was designed for. Sharing usually leads to nuisance tripping and shortens the life of the equipment.
We handle the electrical side: the circuit, the isolation and the connection. Tell us who is supplying and fitting the equipment and we will make sure the electrical work is ready for them.
Yes, and it is a common job. We assess what is there, identify what is not suitable for an outdoor wet location and quote the work needed to bring it up to a state that will last. You get told what is urgent and what can wait.
Within reach of the equipment, in a weatherproof enclosure. The point is being able to safely turn the equipment off where it stands instead of walking to the switchboard, which matters for servicing and for anything going wrong.
It depends on the distance from the switchboard, whether cable needs to go underground, and the condition of any existing wiring. We look at it, quote it and only start once you have agreed. Quotes are free.