0481 272 355 
ontrackelectrical@gmail.com
Lighting Installation in Berwick
Brighter rooms, lower running costs and lighting that makes a space worth sitting in after dark. Installed by a licensed local electrician.
Rated 5.0 from 10+ Google reviews
Lighting That Works Better for Your Home
Good lighting can completely change how a room looks and feels. Ontrack Electrical installs and upgrades lighting across Berwick and Melbourne’s south east, from LED downlights and replacement fittings through to feature and accent lighting.
Whether you’re replacing old lighting, brightening a dark room or planning something more considered for a renovation or living space, we can help with the layout, installation and switching needed to get the result right.
We’ll work with what’s already in your home, recommend practical options and give you a free quote.
Get A Free QuoteWhat We Install
Indoor Lighting
Replace fittings that have failed and put light where the room actually needs it, on switching that suits how you use the space.
View Indoor LightingLED Lighting & Downlights
Swap tired halogens for LED and get brighter, whiter light, far less ceiling heat and a noticeable drop in running cost.
View LED Lighting & DownlightsFeature Lighting
Concealed strip lighting behind panelling, above cabinetry or under a bulkhead, to change how a room looks in the evening.
View Feature Lighting
Lighting Planned Around Your Home
Good lighting is about more than simply putting a fitting wherever there was one before. The position, brightness, switching and way you use the room all affect how the finished space feels.
We’ll plan the layout with you before installation begins, whether you’re changing a few existing fittings or upgrading the lighting throughout the home. That means the finished result is practical, well considered and suited to the space.
- Lighting layouts planned around how each room is used
- LED upgrades, replacement fittings and feature lighting
- Fully licensed and insured electrical contractor in Victoria
- Free quotes, with the work explained first
What Our Customers Say
- Wendy B Customer
Liam made the whole experience smooth and hassle free. He provided great advice and communicated in a friendly and professional manner. He was accommodating and flexible with my schedule and he left the area clean and tidy. I would definitely recommend him for future jobs.
Google - Aaron L Customer
We were so lucky that some friends recommended Liam. He's friendly, thoughtful, interested in solving problems, in a way that makes him a delight to deal with. We couldn't be happier with the results of his work and unlike other sparkies we've worked with, he turns up on time and even came back on his day off to make sure everything was working as it should. His prices are fair, and his work is of a very high standard. Couldn't be happier. We will definitely be hiring Liam for all future work in our house.
Google - Tania J Customer
Liam is polite, professional and competent. He arrived on time, sourced the problem quickly and gave great advice on the best solution. Very reasonable price, highly recommend
Google
Get A Free Lighting Quote
Tell us which rooms you want to change and what you are trying to achieve. Photos help. We will come back with a clear quote. Contact Ontrack Electrical for a free quote.
- Phone 0481 272 355
- Service Area Berwick & Melbourne's South East
Lighting Questions
Almost always. LEDs use a fraction of the power, last far longer and run cool, which matters because halogen downlights push a lot of heat into the ceiling space. If several have already failed, the rest are usually close behind, so doing them together works out cheaper than replacing them one at a time.
Often yes, and where they do the job is quick with no patching. Where the new fitting is a different diameter we can usually work with a plate or adjust the opening. You hear which applies at the quote, not once the ceiling is open.
Yes, provided there is access above the ceiling or a sensible route to run cable. That is the first thing we check. If a position would mean cutting into a wall or ceiling that then needs patching, we tell you before the work starts.
Lighting used to shape a room rather than only to light it. Concealed strip lighting behind a panelled wall, above cabinetry, under a bulkhead or along a stair. It is normally run on its own switch so you can use it by itself in the evening.
Yes. Old fittings and any redundant transformers come out as part of the job instead of being left sitting in the ceiling space, and the area is cleaned up before we finish.
It depends on the number of fittings, whether the positions already exist and how accessible the ceiling space is. A straight changeover is quick. New positions and concealed lighting take longer. We look at it, price it, and only start once you have agreed.
Lighting Work Explained
Indoor Lighting and Switching
Lighting problems are rarely only about the fitting. A room can be well lit on paper and still feel wrong because everything is on one switch, or because the light sits behind you when you are working at the bench.
Replacing failed fittings is the straightforward half. The half worth thinking about is deciding what goes where and what gets grouped together, so a living area can be bright when you need it and low in the evening without reaching for a lamp.
View Indoor Lighting →LED Downlights and Whole House Changeovers
Halogen downlights were installed in volume through the two thousands and they all reach the end of their life around the same time. That is why the first failure is usually followed by several more within a year.
An LED changeover gives brighter and whiter light for a fraction of the power, and it takes a real amount of heat out of the ceiling space. Doing the house in one visit costs less than replacing fittings individually as they go.
View LED Lighting & Downlights →Feature and Strip Lighting
Concealed lighting is what makes a renovated room look finished. A strip run behind a panelled wall, above overhead cabinets or under a bulkhead throws light onto a surface, not into your eyes, and the effect is far softer than another downlight.
What counts here: hidden: where the strip stops and starts, where the driver sits so it can be reached later, and which switch it lands on. Those get worked out before installation instead of during it.
View Feature Lighting →